AC Repair Tips For Fall

Free AC Repair Service Call with Repair Gilbert AZ

None Compare to Dukes of Air.

When it comes to your air conditioning system, the perfect time for maintenance is in the Fall. Cool, crisp mornings and warm days make this the perfect time to have your HVAC system serviced. During this time, the weather is ideal for your HVAC system to rest and recharge. Here are a few ways to help your system remain in tip-top shape.

Preventive maintenance

Fall is a great time to schedule preventive maintenance for your AC. Getting regular inspections and cleanings will ensure that your unit runs efficiently throughout the season, and will keep your home comfortable. You should schedule preventative maintenance twice a year, once for cooling equipment and again for heating equipment. These checkups are also a good time to ask your HVAC technician questions about your system. In some cases, they will uncover other problems that you may not have noticed.

Fall is also the best time to check your HVAC system. During this time, HVAC professionals will have a less hectic schedule than they do during the rest of the year, when they’re swamped with emergency calls. This means that a simple inspection can help save you money in the long run by avoiding expensive repairs later.

Cleaning of condenser unit

Cleaning of the condenser unit is an essential part of your ac repair. It helps to avoid the buildup of debris inside the unit. When the unit is not covered, dirt and debris can gather inside the coils, causing corrosion. Moreover, it can attract vermin.

A cleaning of the condenser unit is recommended at least once a year. This is especially important in places with dusty conditions or strong winds. A clean condenser is an important component of the HVAC system because it transfers heat and helps control the humidity and temperature inside the home.

Cleaning of evaporator coils

Cleaning the evaporator coils on your AC system is an important part of keeping your system running efficiently. The coils are located inside the air handler, which is usually located in a utility closet, garage, basement, or attic. When dirt and debris build up on the coils, they restrict airflow and reduce cooling efficiency. To prevent this from happening, make sure to clean them at least twice a year.

You can use a solution of hot water and a mild detergent to clean the evaporator coils. Mix the solution in a spray bottle or a garden sprayer and spray it onto the coils. Make sure to allow the solution to penetrate the evaporator coil thoroughly, and wipe away any loose debris using a soft cloth.

Cleaning of condenser

Before you start cleaning the condenser, be sure to disconnect the power to the unit. This switch is usually located near the outside unit. Also, make sure the circuit breaker is turned off. Once the power is off, you can use a hose to spray the coils and fins. Then, use a heavy duty household cleaner to thoroughly clean them.

When cleaning the condenser, be sure to remove the fan cage or cover, as this can cause debris to build up inside the unit. After you remove the fan cage or cover, you can start spraying water through the condenser fins.

If you need a tune up for your AC units in the East Valley, Gilbert, Mesa, Tempe, Chandler area contact our HVAC experts at Dukes of Air. We also provide plumbing services too!

Share This Post!
Facebook
Twitter
Pinterest
LinkedIn
Email